L2 Managed Industrial Gigabit Network Switch 8 Port RJ45 4 SFP

model

ATD-IDS4SF8G-L2

software function

Exchange capacity

64Gbps

packet forwarding rate

32Mpps

MAC exchange

Supports static configuration and dynamic learning of MAC addresses; supports to view and clear MAC addresses; MAC address aging time is configurable Support MAC address learning number limit; support MAC address filtering function;

VLAN

Up to 4096 VLAN; port based VLAN; 802.1Q standard VLAN; Support Voice VLAN; support MAC VLAN;

spanning tree

Support STP spanning tree protocol; support RSTP fast-generating tree protocol; support MSTP multi-spanning tree protocol;

Ring network agreement

Support the industrial-level ring network protocol ERPS

Ring road protection

Support for loop detection / loop avoidance

Hostrom control

Support IGMP Snooping; support MVR (Multicast VLAN Registration);

Support for MLD Snooping (Multicast Listener Discovery Snooping);

DHCP

Support DHCP Client; support DHCP Snooping; support DHCP Relay;

Storm suppression

Support the suppression of broadcast, multicast, unicast, etc

IPv4

Support for static routing;

IPv6

Support ICMPv6, DHCPv6, ACLv 6, IPv6 Telnet; support IPv6 neighbor discovery; support Path MTU discovery Support MLD v1 / v2; support MLD Snooping; support IPv6 static routing

QoS

Supports traffic classification based on the fields of L2 / L3 / L4 protocol header; supports CAR traffic restriction; and supports 802.1P/DSCP priority rekeling Support queue scheduling methods such as SP, WRR, SP + WRR; congestion avoidance mechanism such as WRED; and support traffic supervision and flow shaping

Safety features

Support the ACL flow identification and filtering safety mechanism based on L2 / L3 / L4; Support protection against DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc.; Support multicast, broadcast and unknown single broadcast; support port isolation; Support ports security, IP + MAC + port binding; support DHCP Snooping, DHCP Option 82;

reliability

Optional support power supply 1 + 1 backup; support static / LACP mode link aggregation, support link aggregation across service cards; support ERPS ring network protection;

system maintenance

Support configuration file upload / download; support upgrade package upload; support WEB to restore factory configuration; Support system log function; support Ping; support cable detection; optical module information viewing;

administration of networks

Support WEB interface management (support http and https protocol); support CLI interface management; support Telnet remote management; Support SSH 2.0; support SNMP network management; support RMON; support LLDP; support NTP client;

specifications of the products

Port description

8*10 / 100 / 1000 Base-T Ethernet electrical ports;

4*1000 Base-GX interface SFP light ports

Mechanical parameters

Physical size (height, width and depth): 140mm×50mm×115mm;

Installation method: standard DIN card rail type;

Heat dissipation form: aluminum alloy single-ribbed chassis surface heat dissipation, no fan;

Housing protection: IP40

Status indicator light

Operating indicator light: RUN;

Power supply indicator lamp: PWR1, PWR2;

Interface indicator lamp: Link, ACT (light port, electrical port)